Hach - Analytical Instruments And Reagents Used To Test The Quality Of Water And Other Liquid Solutions. 2

Peralatan Medis LainnyaPhosVer® 3 Phosphate Reagent Powder Pillows, 10 mL, pk/100catalog :2106069For determination of reactive (ortho) phosphate (phosphorus) by the PhosVer® 3 ascorbic acid method.USEPA accepted for reporting for wastewater analysis using Hach Method 8048, Phosphorus, Reactive.Also used in acid-hydrolyzable and total phosphorus determination, after appropriate digestion.Sample Size: 10 mL. Pack of 100 powder pillows. SpecificationsDescription :PhosVer 3 Phosphate Reagent Powder Pillows, 10 mlEPA compliant:YesInstrument:All except DR/3000,DR/2000, DR/820Method:8048Method Name:Ascorbic AcidNumber of tests:100Parameter:Phosphorus, reactivePlatform :Powder PillowsQuantity:100 /pkRange:0.02 - 2.50 mg/L PO4Reference method:SM 4500-P-EShelf Life:40 monthsStorage Conditions:10 °C to 25 °CParameter/Range/Product InformationPhosphonatesMethodRangeInstr, Test Kit, etcUSEPA Compliant? 8007 DR8000-2.5 , 0-125 mg/LView  8007 Powder Pillows DR300 PCII1.0 - 125 mg/L PO₄³⁻View  8007 Powder Pillows Persulfate UV Oxidation0.02 - 2.50 mg/L PO43-View  8007 Powder Pillows Persulfate UV Oxidation0.1 - 2.5 mg/LView  8007 Powder Pillows Persulfate UV Oxidation1.0 - 125 mg/L PO43-View PhosphorusMethodRangeInstr, Test Kit, etcUSEPA Compliant? 8048 DR800 Powder Pillows or AccuVac0 - 2.50 mg/L PO4 3-ViewY 8048 Pocket Colorimeter PhosVer 3 (Ascorbic Acid) Method0.02 - 3.00 mg/L PO₄View  8048 Powder Pillows or AccuVac® PhosVer 3, Ascorbic Acid0.02 - 2.50 mg/L PO4ViewY

Laboratory ReagentsHach 2283649 Buffer Solution | pH 10.01 (NIST) | Blue | 500 mLPART NO.2283649Hach 2283649 Buffer Solution is used for pH meter calibration and standardization.Color-coded for easy identification.pH is 10.01 ± 0.02 at 25°C.

Laboratory ReagentsBuffer Solution, pH 7.00, Color-coded Yellow, 500 mLpH Buffer standard solutions for laboratory and field analysespH Buffer Standard Solution for pH electrode calibration. Color-coded pH Buffer solution for easy identification. pH is 7.00 ±0.02 at 25°C. 500 mL bottleTraceable to NIST standard reference materialsDesign for use with Hach meters portfolio and other meters.Reliable packagingTraceable to NIST standard reference materialsWhether in the laboratory or in the field, always perform measurement results you can trust is essential. The quality of the standard pH Buffer Solutions that are used are key.Design for use with Hach meters portfolio and other meters.The basis for accurate pH measurements is good care and calibration of the pH Electrode.Reliable packagingSupplied in an airtight packaging ensuring guaranteed shelf-life. SpecificationsColor coded?:YesDescription :pH Buffer Calibration reagentNIST Traceable:YesPackage Type:BottlepH Value(s):7.00 ±0.02 pH at 25°CQuantity:500 mLShelf Life:24 monthsSpecial Remarks:Observed shelf-life after opening, following recommended storage and use: 6 monthsStorage Conditions:10 - 25 °C (protect from light)Parameter/Range/Product InformationpHMethodRangeInstr, Test Kit, etcUSEPA Compliant? 8156 pH Meter Electrode Method0 - 14 pHViewY 8156 pH Meter Electrode MethodpH 8156 7.00 pH

Laboratory ReagentsBuffer Solution, pH 4.01, Colour-coded Red, 500 mLpH Buffer standard solutions for laboratory and field analysespH Buffer Standard Solution for pH electrode calibration. Colour-coded pH Buffer solution for easy identification. pH is 4.01 ±0.02 at 25°C. 500 mL bottleTraceable to NIST standard reference materialsDesign for use with Hach meters portfolio and other meters.Reliable packagingTraceable to NIST standard reference materialsWhether in the laboratory or in the field, always perform measurement results you can trust is essential. The quality of the standard pH Buffer Solutions that are used are key.Design for use with Hach meters portfolio and other meters.The basis for accurate pH measurements is good care and calibration of the pH Electrode.Reliable packagingSupplied in an airtight packaging ensuring guaranteed shelf-life. SpecificationsColor coded?:YesDescription :pH Buffer Calibration reagentNIST Traceable:YesPackage Type:BottlepH Value(s):4.01 ±0.02 pH at 25°CQuantity:500 mLShelf Life:48 monthsSpecial Remarks:Observed shelf-life after opening, following recommended storage and use: 6 monthsStorage conditions:10 - 25 °C (protect from light)

Alat Ukur Kuat ArusSpecificationsRangeCameraSensor size¼" CMOSSensor pixels300,000Maximum frame rate30 FPSColor resolution24 BitFocusing methodFixed focus 15cm to 25cm (5.9" to 9.8")Gooseneck length1m (39")Camera diameter17mm (0.66")LCD Display2.4" Color LCDDisplay resolution480 (W) X 234 (H) pixelsActive area48mm x 35.6mm (1.9 x 1.4")Light Source4 LEDsAdjustable light intensity6 illumination levelsVideo formatNTSC/PAL (automatic conversion)PowerRechargeable 1800mAH lithium batteryCurrent consumption400mA max.Standby current5mA max.Low battery warningVoltage falls below 3.3VEnviormentalOperating Temperature32°F ~ 122°F (0°C ~ 50°C)Relative Humidity85% max.

Alat Laboratorium AirDescriptionCAL2K Oxygen Bomb Calorimeter SystemFully Automatic. Guaranteed Accuracy.The CAL2K system is the most advanced, fully automatic calorimeter available today. The result of years of research with dedicated engineers employing the latest state-of-the-art technology and the highest quality materials. Advanced. Fully Automatic.The CAL2K system is the most advanced, fully automatic calorimeter available today. The result of years of research with dedicated engineers employing the latest state-of-the-art technology and the highest quality materials.The CAL2K is easy to use and has special features which places it in a league of its own. Accuracyis guaranteed with microprocessors that use self-correcting processes, exceeding the standard requirements of DIN, ASTM and ISO. Its ability to interface with a personal computer, ensures preferred results with display, data printouts and connectivity across a network.The CAL2K has been designed for the high volume market and is most suitable for customers running 10 or more CV samples per day. CAL2K FeaturesFEATUREDESCRIPTIONEasy to maintainEasy to maintain, self system test for technicians.Compact Size. Fits Almost Anywhere.Compact Size - able to fit more systems into a standard laboratory.Fully Automatic Operation.Fully automatic operation - temperature readings and calculations are done for you.Network up to 7 CalorimetersPossible to network up to 7 calorimeters.Rapid. Accurate.Rapid and accurate determinations.10 Samples Per Hour10 samples per hour using the CAL2K Cooler and 2 Bomb Vessels.Waterless VesselIsothermal design using a waterless patented vessel. No bucket, no spillage, no measuring.More Memory. More Determinations.Large memory for storing more than 2000 determinations, including operating conditions and user statistics.Automatic CorrectionAutomatic correction for firing wire, cotton, spikes, etc.Automatic CalibrationFully automatic calibration, with 10 calibrations per vessel for standard deviation.Calibrated SensorsCalibrated sensors built into vessel wall.Optional SpikingCan use spiking for hard to combust samples.Intelligent "SMART" VesselIntelligent SMART vessel with fault diagnostics and calorific processor.Pre-Programmed VesselVessels are pre-programmed for 5000 determination cycles before inspection.Firing LimitsAdjustable firing limits set per vessel.High and Low Mass Limits Determination Cycle Adjustment Precise and reproducible determination of gross calorific values according to ISO 1928, DIN 51900 and BS1016:105.   CAL2K Technical SpecificationsTECHNICAL SPECIFICATIONSDESCRIPTIONConnectivityMulti-drop RS232 port at 9.6KBLIMSNoMass HEAPYesBalance InterfaceYes, at 2.4KBResult Memory2048 records, 131KBTemperature Resolution0.000'01°CDisplay4 x 40 character LCDKeyboardLimited, front panel, no ASKII, onboardSample ID6 charactersGroup ID8 charactersVessel RecordNoReal TimeYesChassis IdentificationNoCalibrationNormal replace, single or multipleHistory CalibrationNoUnitsKJ, BTU, CALResult CompensationNoResult ValidationNoVessel Pressure MonitorNoOxygen FillingExternal Manual Filling StationDe-FillingManualMax Chassis Recording-Chassis NameNoPassword ProtectionUser Security Manager Password, PC PasswordNetwork Multiple CalorimetersYes, up to 7 x CAL2KVessel Leak MonitorNoEvent StorageNoEvent Types-Event Classification-Vessel InterchangeNoVessel Lockout, Lock-inNoSample Repeat Speed7-8minOperator Time Per Test2minCoolingWaterCooling Modes-RSD0.1Power Consumption0-264 VAC 50/60Hz 5WPower SupplyExternal 9VWater ConsumptionYes, re-circulatingRepeatability0.1%Calorimeter TypeStatic Jacket (Isothermal)Number of VesselsUnlimited (10+)Closure TypeScrew CapTests per hour with 2 vessels10Bomb Vessel TypeRemovableOxygen FillingSemi-AutomaticBomb Vessel WashingManualPrinter ConnectionRS232Balance ConnectionRS232Environmental10-40°CPrinting of ResultsVia PC SoftwarePC SoftwareAdvancedCorrection Factors2Mass EntryAuto & ManualCE/TUV CertificateYesVessel Determinations5000SpikingYesSelf TestingNo CAL2K ADDITIONAL EXTRAS The complete CAL2K system consists of : The CAL2K-1 Calorimeter, CAL2K-1-KT Calorimeter Installation Kit, CAL2K-2 Cooler, CAL2K-2-KT Cooler Installation Kit, CAL2K-3 Filling Station, CAL2K-3-KT Filling Station Installation Kit, CAL2K-4 Vessel and the CAL2K-3-KT Vessel Installation Kit. Additional Extras- CAL2K Interconnection Cable (required only when networking units)- Regulator - High Pressure Oxygen Regulator (required and MUST be supplied before installation) Items To Source- Balance (recommended Sartorius Balance CP64 equivalent)- Water Tap Connection- PC with Windows 98/2000/NT4.0 installed (required only if running software - a PC is not required to operate the unit) CAL2K COMPLETE SYSTEMThe complete CAL2K system consists of : The CAL2K-1 Calorimeter, CAL2K-1-KT Calorimeter Installation Kit, CAL2K-2 Water Cooler, CAL2K-2-KT Cooler Installation Kit, CAL2K-3 Filling Station, CAL2K-3-KT Filling Station Installation Kit, CAL2K-4 Vessel and the CAL2K-4-KT Vessel Installation Kit. CAL2K CalorimeterThe CAL2K-1 Calorimeter can operate as either a stand-alone unit or via a PC. When operating as a stand-alone unit it is operated via the keyboard and all relevant information is displayed on the LCD Display. Up to 7 Calorimeters can be connected as a network with or without a PC. The CAL2K-4 VesselThe CAL2K-4 Vessel is the first of its kind and is the heart of the CAL2K System. Its sophisticated design allows the temperature to be measured to five decimal places in degrees Celsius. The vessel is an intelligent (SMART) vessel with a microprocessor built into its base. The vessel is capable of : firing counts, identification, memory and reconditioning data. The vessel is the combustion chamber. It is made of stainless steel and tested up to a pressure of 300 atmospheres (4200psi). The CAL2K Filling StationThe Filling Station is designed to fill the vessel with oxygen to 3Mpa. The filling rate is controlled so as not to disrupt the sample in the crucible. The Filling Station is extremely easy to operate and requires minimal adjustments and maintenance. The CAL2K Water CoolerThe unit is designed to reduce the temperature of a recently fired vessel, obtained from the calorimeter, to ambient temperature in 2-3 minutes.Solid state cooling is used and the hot junction of the peltier elements is cooled by a continuous trickle of water from the mains water sup

Alat Uji Kualitas AirFrom the easy-to-read display to reliable data management with SD card data transfer, the flow system provides an economical choice for flow monitoring. The flow system can be used for a variety of applications including NPDES permitting requirements and the monitoring of storm water, inlet flow, final effluent and activated sludge. It replaces the Hach GLI53 analog controller with advanced features for easier operator use. The SC200 controller platform can be configured to operate either 2 Digital Sensor Inputs, or 1 or 2 Analog Sensor Inputs, or a combination of Digital and Analog Sensor Inputs. Customers may choose communication options from a variety of offerings ranging from MODBUS RTU to Profibus DPV1. Maximum Versatility • Standardized controller eliminates the need for a variety of dedicated controllers • Multi-channel controller operates either 1 or 2 sensors reducing inventory holding costs and providing an inexpensive option to add a second sensor at a later time • True dual sensor controller provides 4-20 mA outputs to transmit primary and secondary measurement values • Controller may be panel, surface or pole mounted (hardware included) Display • Large display with scrolling menus for easy set up • Transreflective display stays readable even in sunlight Data Management • SD Card simplifies data dowload and transfer • Update firmware via SD card or special RS232 cable Ultrasonic Flow Sensor • Select primary gauging structure from the library of flumes and weirs for flow sensor set up or enter a flow curve for non-standard structure • Non-contact flow sensor requires no routine maintenance • Pulse echo technology Sensor Inputs • Analog sensor modules may be added in the field • Digital sensor ports are factory installed • Controller will scan and detect new sensors added • Works with GLI and Hach digital sensors Analog Inputs • Enables non-sc analyzer monitoring • Accepts mA signals from other analyzers for local display • Consolidates analog mA signals to a digital output 4-20 mA Outputs • Total of six (6) 4-20 mA outputs (2 std/4 optional) enables up to 3 mA outputs per sensor input Digital Communication • MODBUS 232/485 and Profibus DP V1.0 Ease of Use and Confidence in Results • New display and guided calibration procedures reduce operator error • Password protection to prevent tampering and unwanted programming changes • Visual warning system provides critical alerts The SC200 Universal Controller with Ultrasonic Sensor is designed to give highly accurate flow and depth measurements for your open channel flow monitoring applications. Applications • Wastewater • Collection Systems • Industrial Water 2 Hach SC200 Universal Controller with Ultrasonic Flow Sensor UltraSonic Flow Sensor Flow Rate 0-9999, 0-999.9, 0-99.99 with selectable flow rate units Volume 0-9,999,999 with selectable volume units Depth Measurement Range/Resolution 0.25 m (10 in.) to 6 m (20 ft.) ±1 mm (0.04 in.) Air Temperature -40 to to 90°C (-40 to 194°F) ±0.1°C (0.18°F) Input Filter 999 sec Totalizers 8-digit resettable LCD software totalizer Totalized Flow Gal., ft.3, acre-ft., lit., m3, in.3 Totalizer may be set to auto or manual mode. (Menu option to reset is available in manual mode only.) Accuracy ±0.5% of span Repeatability ±0.1% of span Sensor Cable (integral) Lengths 10 m (33 ft.), 20 m (66 ft.), 50 m (164 ft.), or 100 m (328 ft.) Calibration Methods Cal Depth 1 point; Cal Depth 2 point Operating Frequency 75kHz Construction NEMA 6P (IP68) polybutylene terephthalate (PBT) body with integral temperature sensor Weight ~0.5 kg (1.1 lb) Select from the Following Gauge Types: V Notch Weir Rectangle Weir Rectangle Flume Round Bot Flume Cipolletti Weir Neyrpic Flume Parshall Flume P Bowlus Flume Khafagi Flume L Lagco Flume H Type Flume Trapezoidal Flume User Defined *Subject to change without notice. hachflow.com Specifications* SC200 General Specifications Display Graphic dot matrix LCD with LED backlighting. Transreflective Display Size 48 x 68 mm (1.89 x 2.67 in.) Display Resolution 240 x 160 pixels Height x Width x Depth 144 x 144 x 181 mm (5.7 x 5.7 x 7.1 in.) Weight 1.70 kg (3.75 lb) Power Requirements 100 – 240 Vac ±10%, 50/60 Hz; 24 Vdc -15% + 20% Operating Temperature -20 to 60°C (-4 to 140°F), 0 to 95% RH non-condensing Storage Temperature -20 to 70°C (-4 to 158°F), 0 to 95% RH non-condensing Analog Output Signal Two 0/4 to 20 mA isolated current outputs, max 500Ω Operational Mode Primary or secondary measurement or calculated value (dual channel only) Functional Mode Linear, Logarithmic, Bi-linear, PID Optional 4 additional 4/20 mA isolated current outputs, max 500Ω @ 18-24 Vdc (customer-supplied power source) Security Levels Two password protected levels Enclosure Materials Polycarbonate, Aluminum (powder coated), Stainless Steel Mounting Configurations Wall, pole and panel mounting Enclosure Rating NEMA 4X / IP 66 Conduit Openings 1/2" NPT Conduit Relays Four electromechanical SPDT (Form C) contacts, 1200W, 5 A, 250 Vac Operational Mode Primary or secondary measurement, calculated value (dual channel only) or timer Functional Mode Alarm, Timer, Feeder Control, PWM or FM Control, System Alarm Digital Communication MODBUS RS232/RS485, Profibus DPV1 optional Memory Backup Flash memory Electrical Certifications EMC: CE compliant for conducted and radiated emissions CISPR 11 (Class A limits), EMC Immunity EN 61326-1 (Industrial limits) Safety: General Purpose UL/CSA 61010-1 with cETLus safety mark Data Logging Secure Digital Card (Maximum recommended capacity 8 GB) or special RS232 cable connector for data logging and performing software u

Alat Uji Kualitas AirThe Hach SC1000 Multi-parameter Universal Controller is a state-of-the-art modular transmitter system. The SC1000 consists of a Display Module and at least one Probe Module. Probe Modules for the SC1000 can be networked together to accommodate up to 32 digital sensors or analyzers. The SC1000 Display Module is intuitive, with an easy to use interface and large color touch-screen display that can be used for any number of parameters. One Display Module controls one or more Probe Modules connected by a digital network. The Display Module is fully portable, and can be disconnected and moved anywhere within the network. The Hach SC1000 Display Module is available with GSM/GPRS, Ethernet, and TCP/IP capability. Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.

HACH DR 900 ColorimeterAlat Laboratorium Air The handheld colorimeter allows for quick and easy access to your most frequently used testing methods in less than four clicks. This colorimeter is waterproof, dustproof, shock resistant, and has been drop tested for greater quality assurance.This instrument comes with an intuitive user interface, a large data storage and a built-in USB port for the easy transfer of information. The handheld colorimeter also helps satisfying core testing needs by offering at least 90 of the most common testing parameters.Combining all these features with a push button backlit display for use in low light areas, you have a handheld colorimeter which is field-ready, and makes testing in harsh field environments a little less challenging. 

HACH Ascorbic Acid Powder Pillows 1457799Alat Laboratorium Air SpecificationsNumber of tests:VariesParameters:Aluminum, Chelant, ManganesePlatform :Powder PillowsQuantity:100 /pkRange:-Unit:100 /pk Parameter/Range/Product InformationAluminum                                    Method                                                Range                                  8012 Colorimeters, Powder Pillows                    0.01 - 0.80 mg/L Al₃+                                                                  8012 DR800                                                     0 - 0.80 mg/L                                8012 Spectrophotometer, Powder Pillows             0.008 - 0.800 mg/L Al   Chelant                                        Method                                                   Range                                    8350 Total, Digital Titration Bismuth Nitrate        0 - 40.0 mg/L Na₄ EDTA   Manganese                                  Method                                                    Range                                                8149 DR800 PAN                                  0 - 0.700 mg/L                                                                                        8149 PAN                                             0.01 - 0.70 mg/L Mn                                                 8149 Powder Pillows PAN Method           0.006 - 0.700 mg/L Mn