LAB UMUM

PolypropyleneDetails•Conform to ISO 6706•Ultra clear polypropylene with good chemical resistance•Large pouring spout for easy dispensing•Stable hexagonal bases with non slip anti-suction feature•Permanent moulded graduationsProduct detailsItem Weight: 45.4 gBoxed-product Weight: 227 gItem model number: CP0010PASIN: B00L29SU9QDate first available at Amazon.co.uk: 14 Nov. 2018Average Customer Review: Be the first to review this itemAmazon Bestsellers Rank: 233,233 in Business, Industry & Science (See Top 100 in Business, Industry & Science)Product descriptionConform to ISO 6706. Ultra clear polypropylene with good chemical resistance. Large pouring spout for easy dispensing. Stable hexagonal bases with non slip anti-suction feature. Permanent moulded graduations.

Alat Ukur KekeruhanRange 0.00 to 50.00 FTU; 50 to 1000 FTU Resolution 0.01 FTU ( 0.00 to 50.00 FTU) ; 1 FTU ( 50 to 1000 FTU) Accuracy ± 0.5 FTU or ± 5% of reading ( whichever is greater) Calibration 3 points ( 0 FTU, 10 FTU and 500 FTU) Light Source infrared LED Light Detection Silicon Photocell Battery Type / Life 1.5V AA ( 4) / approximately 60 hours of continuous use or 900 measurements; auto-off after 5 minutes of non-use Environment 0 to 50° C ( 32 to 122° F) ; RH max 95% non-condensing Dimensions 220 x 82 x 66 mm ( 8.7 x 3.2 x 2.6" ) Weight 510 g ( 1.1 lb.)

Alat Laboratorium UmumRange   FNU Mode 0.00 to 9.99; 10.0 to 99.9; 100 to 1000 FNU   FAU Mode 10.0 to 99.9; 100 to 4000 FAU   NTU Ratio Mode 0.00 to 9.99; 10.0 to 99.9; 100 to 4000 NTU 0.00 to 9.99; 10.0 to 99.9; 100 to 980 EBC   NTU Non-Ratio Mode 0.00 to 9.99; 10.0 to 99.9; 100 to 1000 NTU 0.00 to 9.99; 10.0 to 99.9; 100 to 245 EBC Resolution FNU Mode 0.01; 0.1; 1 FNU   FAU Mode 0.1; 1 FAU   NTU Ratio Mode0.01; 0.1; 1 NTU / 0.01; 0.1; 1 EBC   NTU Non-Ratio Mode 0.01; 0.1; 1 NTU / 0.01; 0.1; 1 EBC Accuracy @25°C FNU Mode ±2% of reading plus stray light   FAU Mode ±10% of reading   NTU Ratio Mode±2% of reading plus stray light / ±5% of reading above 1000 NTU   NTU Non-Ratio Mode ±2% of reading plus stray light Range Selection   automatic Repeatability   ±1% of reading or stray light, whichever is greater Stray Light   < 0.1 NTU (0.05 EBC) Light Detector   silicon photocell Light Source   IR LED Method   ISO 7027 Method Measuring Mode   normal, average, continuous. Turbidity Standards   <0.1, 15, 100, 750 FNU and 2000 NTU Calibration   two, three, four or five-point calibration Log Memory   200 records PC Connectivity   USB Environment   0°C (32°F) to 50°C (122°F); max 95% RH non-condensing Power Supply   12 Vdc power input Dimensions / Weight   230 x 200 x 145 mm (9 x 7.9 x 5.7”) / 2.5 Kg (88 oz.)

TDS MeterRange 0 to 999 ppm Resolution 1 ppm Accuracy @ 25° C ± 2% F.S. TDS Conversion Factor 0.5 Probe HI 7634-00 EC/ TDS probe with internal temperature sensor and 2 m ( 6.6’ ) cable ( not included) Temperature Compensation Automatic, 5 to 50° C ( 41 to 122° F) with ß = 2% / ° C Calibration manual, with CAL trimmer Dosing Relay maximum 2A ( fuse protected) , 250 Vac, 30 VDC Contact close when measure: > set point Setpoint adjustable from 0 to 19.99 ppm Overtime adjustable, typically from 5 to approx. 30 minutes Power Supply See Chart Dimensions 79 x 49 x 95 mm ( 3.1 x 1.9 x 3.7’ ’ ) Weight See Chart

Dissolved Oxygen MeterRange O2 0.0 to 19.9 mg/ L ( ppm) Temperature -5.0 to 50.0º C ( 32.0 to 122.0º F) Resolution O2 0.1 mg/ L ( ppm) Temperature 0.1° C ( 1º F) Accuracy ( @ 20° C) O2 ± 1.5% F.S. Temperature ± 0.2° C ( ± 1º F) ( excluding probe error) Calibration manual, at one or two points ( zero and slope) Temperature Compensation automatic, 0 to 50° C ( 32 to 122° F) Probe HI 76407/ 4 polarographic DO probe with internal temperature sensor, DIN connector and 4 m ( 13’ ) cable Battery Type / Life 1.5V AAA ( 3) / approximately 1, 000 hours of continuous use Environment 0 to 50° C ( 32 to 122° F) ; RH max 95% Dimensions 185 x 72 x 36 mm ( 7.3 x 2.8 x 1.4” ) Weight 300 g ( 10.6 oz.)

Dissolved Oxygen MeterThe HI9146 is a rugged, portable dissolved oxygen (DO) meter designed to provide laboratory precision and accuracy under harsh environmental and industrial conditions. Developed for measuring dissolved oxygen in water, wastewater, and environmental testing, this meter can also compensate for altitude and salinity.Robust waterproof casing makes it ideal for field use.Setup and calibrate your meter in no time with 1 point calibration.Perfect for water and wastewater monitoring, environmental, and aquaculture applications.Dissolved oxygen is a commonly measured parameter in aquaculture, wastewater treatment, environmental studies, and wine analysis. The HI9146 is a rugged, portable dissolved oxygen (DO) meter designed to provide high accuracy measurements whether in the field or in the lab. The meter features automatic calibration performed at one or two points in saturated air and/or zero oxygen solution.All readings are automatically compensated for temperature variations and can be frozen on the display upon stability using the auto-end feature. Salinity and altitude compensation are user adjustable based on the environmental conditions that are present. The HI9146 features a Battery Error Prevention System (BEPS) that detects when the batteries become too weak to ensure reliable measurements. The HI9146 portable DO meter is supplied complete and ready to use. Features at a GlancePolarographic Measuring System - The oxygen meter and probe use polarographic sensor technology based on the Ross and Clark polarographic measurement method. The probe is comprised of a platinum cathode and silver anode in an electrolyte solution held in place over the surfaces of the electrodes by a polymer membrane. An external voltage applied across the system establishes a current proportional to the concentration of dissolved oxygen.Replaceable Membrane Caps - The pretensioned thin polytetrafluoroethylene (PTFE) membranes employ a screw cap design that can be changed quickly by simply filling with the HI7041 electrolyte fill solution and screw on the DO probe.Automatic Calibration - Calibration can be performed at one or two points to 100% and/or 0% saturation. The 100% saturation is done in air while the 0% is done with the HI7040 bicomponent zero oxygen solution.Good Laboratory Practice (GLP) - The Good Laboratory Practice feature allows the user to recall calibration information including date, time and calibrations points.Automatic Temperature Compensation - All readings are automatically compensated for temperature variations with a high accuracy, built-in linearized thermistor temperature sensor behind a stainless steel cover.Altitude Compensation - The HI9146 allows for altitude compensation for up to 4000 meters with a 100-meter resolution.Salinity Compensation - Salinity compensation is adjustable from 0 to 80 g/L (ppt) with a 1 g/L resolution for the measurement of DO in brackish and sea water.Auto End Point - The HI9146 features an auto endpoint mode in which, when selected, the reading will freeze on the display once a stable measurement is obtained. The auto-end feature allows for consistency among various users by ensuring that stability has been achieved before recording a measurement.Backlit LCD - The HI9146 dissolved oxygen meter has a display with a backlight for easy viewing of readings in poor lighting conditions.Battery Error Prevention System (BEPS) - The Battery Error Prevention System detects when the batteries become too weak to ensure reliable measurements. The backlight feature is automatically disabled when batteries are getting low and a clear indication is displayed to warn the user of this condition. SpecificationsDO Range0.00 to 45.00 ppm (mg/L), 0.0 up to 300.0% saturationDO Resolution0.01 ppm (mg/L); 0.1% saturationDO Accuracy (@25ºC/77ºF)±1.5% F.S. or ±1 digit, whichever is greaterDO Calibrationone or two points at 0% (HI 7040 solution) and 100% (in air)Temperature Range0.0 to 50.0°C / 32.0 to 122.0°FTemperature Resolution0.1°C / 0.1°FTemperature Accuracy (@25ºC/77ºF)±0.2°C; ±0.4°F (excluding probe error)Temperature Compensationautomatic from 0 to 50°C (32 to 122°F)Altitude Compensation0 to 4000 m (resolution 100 m)Salinity Compensation0 to 80 g/L (ppt) (resolution 1 g/L)Electrode/Probepolarographic DO probe, internal temperature sensor, DIN connectorBattery Type/Life1.5V AAA (3) /approximately 200 hours of continuous use without backlight (50 hours with backlight on)Environment0 to 50°C (32 to 122°F); RH max 95%Dimensions185 x 72 x 36 mm (7.3 x 2.8 x 1.4”)Weight300 g (10.6 oz.)Ordering InformationHI9146 is supplied complete with HI76407 DO probe, HI76407A pre-formed PTFE DO membranes (2), HI7041S electrolyte solution (30 mL), batteries, instructions and rugged carrying case.Warranty2 years (probe 6 months)

Dissolved Oxygen MeterThe HI9147 is a rugged, water-resistant dissolved oxygen (DO) meter designed to provide precision and accuracy under harsh environmental conditions. The meter features a manual one point calibration, automatic temperature compensation, and salinity and altitude compensation. The HI9147 supplied with a galvanic, HDPE membrane caps, electrolyte fill solution, a protective shield, and sturdy carrying case.Easily Replaceable Membrane CapsManual CalibrationGalvanic Measuring SystemDissolved oxygen is a commonly measured parameter in aquaculture, wastewater treatment, environmental studies, and wine analysis. The HI9147 is a rugged, water-resistant dissolved oxygen (DO) meter designed to provide precision and accuracy under harsh environmental conditions. The meter features a manual one point calibration, automatic temperature compensation, and salinity and altitude compensation. The HI9147 includes a galvanic probe with replaceable high-density polyethylene (HDPE) membrane caps and a protective shield.The salinity compensation allows for the determination of dissolved oxygen even in salty waters making this an ideal meter for aquaculture applications. The HI9147 is supplied complete and ready to use. Features at a GlanceReplaceable Membrane Caps - The pretensioned high-density polyethylene (HDPE) membranes employ a screw cap design that can be changed quickly by simply filling with the HI7042 electrolyte fill solution and screwing onto the DO probe.Galvanic Measuring System - The meter and probe use galvanic sensor technology where the electrodes’ potential difference drives the reaction, requiring no external voltage. The probe is comprised of a silver cathode and zinc anode in an electrolyte solution held in place over the surface of the electrodes by a polymer membrane. Oxygen diffuses across the membrane and the system establishes a current proportional to the concentration of dissolved oxygen present.Automatic Temperature Compensation - All readings are automatically compensated for temperature variations with a high accuracy, built-in linearized thermistor temperature sensor behind a stainless steel cover.Altitude Compensation - The HI9147 allows for altitude compensation for up to 4000 meters with a 100-meter resolution.Salinity Compensation - Salinity compensation is adjustable from 0 to 51 g/L (ppt) with a 1 g/L resolution for the measurement of DO in brackish and sea water.Backlit LCD - The HI9147 has a display with a backlight for easy viewing of readings in poor lighting conditions.SpecificationsDO Range0.00 to 50.00 ppm (mg/L); 0.0 to 600.0% saturationDO Resolution0.1 mg/L (ppm); 1% saturationDO Accuracy (@25ºC/77ºF)±1% of readingDO Calibrationmanual, in saturated airTemperature Range0.0 to 50.0°C / 32.0 to 122.0°FTemperature Resolution0.1°C; 1°FTemperature Accuracy (@25ºC/77ºF)±0.2°C; ±1°F (excluding probe error)Temperature Compensationautomatic from 0 to 50°C (32 to 122°F)Altitude Compensation0 to 4000 m (resolution 100 m)Salinity Compensation0 to 51 g/L (ppt) (1 g/L resolution)Electrode/Probegalvanic DO probe, internal temperature sensor, DIN connectorBattery Type/Life1.5V AAA (3) / approximately 1000 hours of continuous use without backlightEnvironment0 to 50°C (32 to 122°F); RH max 95% non-condensingDimensions185 x 72 x 36 mm (7.3 x 2.8 x 1.4”)Weight450 g (15.9 oz.)Ordering InformationHI9147 is supplied complete with HI76409 probe, HI76409A/P pre-formed HDPE DO membranes (2), HI7042S electrolyte solution (30 mL), batteries, instructions and rugged carrying caseWarranty2 years (probe 6 months)

Lux MeterSpecificationsRange   0.001 to 1.999 Klux;0.01 to 19.99 Klux;0.1 to 199.9 Klux Resolution   0.001 Klux;0.01 Klux;0.1 Klux Accuracy   ±6% of reading ±2 digits Sensor   human-eye-response silicon photodiode with 1.5 m coaxial cable (fixed) Battery Type / Life   1 x 9V / approx. 200 hours of continuous use;auto-off after 7 minutes of non-use Environment   0 to 50°C (32 to 122°F); RH max 100% Dimensions   164 x 76 x 45 mm (6.5 x 3.0 x 1.8") Weight   180 g (6.3 oz.)

ORP MeterThe HI98120 is a waterproof ORP and temperature handheld meter. The housing of this tester is completely sealed to protect against the intrusion of water and is also designed to float if accidentally dropped into a body of water. The HI73120 replaceable ORP electrode is a cartridge design with the stainless steel round connector. With this type of design there are no pins that can bend or break during replacement. The ORP electrode also hase has an extendable cloth junction. This type of junction allows for the renewal of the junction by simply pulling out 3 mm (1/8”) to clear any clogging which improves measurement response time and stability. The exposed stainless steel temperature probe on this meter facilitates a faster, accurate temperature measurement.WaterproofReplaceable ORP Electrode Extractable JunctionDetailsSimilar to a pH measurement that quantifies the how acidic or alkaline solutions are, ORP (Oxidation Reduction Potential) measurements quantify the overall state of a solution as having the ability to oxidize or reduce a chemical species. Oxidizing and reducing reagents are used to participate in chemical reactions known as a redox reaction.An important part of the ORP probe is to have a sensor that is chemically inert; meaning it cannot be oxidized or reduced itself. It must also have the proper surface characteristics to promote rapid electron exchange, a property known as high exchange current density. Two noble metals have proven to work well for this purpose: pure platinum and pure gold. Both are commonly used in the construction of ORP probes.The platinum sensor is often preferred because it is mechanically simpler to produce. Platinum can be welded to glass and also has a similiar thermal expansion coefficient. Sensors made of gold cannot be welded to the glass and are often placed in plastic supports applied to the glass or plastic tube by means of tiny elastomeric bungs.Many industries rely upon ORP measurements including swimming pools, food processing, boilers and cooling towers, and plating. The measurement of ORP helps the user monitor the effectiveness of disinfecting compounds including chlorine and ozone. ORP is also used to monitor redox reactions including the use of bisulfite in the reduction of hexavalent chromium to trivalent chromium in plating wastewater.Features at-a-glance:WaterproofIP67 ratedProtects the internal electronics of the meter from an ingress of water in the event that the meter is dropped into a tank or a body of water.Stability indicatorHI98120 features a stability indicator tag on the LCD that will disappear once the reading stabilizes.  Replaceable electrodeAn electrode last approximately one to two years. It is possible to replace just the electrode and not have to buy a completely new meter.The HI73120 ORP electrode is a simple cartridge design allows the sensor to be easily replaced whether in the lab or in the field.HOLD featureAllows the reading to be frozen so that the reading can be documented.Auto-shut offThe meter automatically turns itself off after 8 minutes of use in order to conserve battery life in the event the meter is accidently left on.Battery % levelWhen the meter is turned on the battery % level is displayed as a percentage.SpecificationsORP Range±1000 mVORP Resolution1 mVORP Accuracy±2 mVTemperature Range-5.0 to 60.0°C / 23.0 to 140.0°FTemperature Resolution0.1°C / 0.1°FTemperature Accuracy (@25ºC/77ºF)±0.5°C /±1°FORP Calibrationfactory calibratedBattery Type/Life1.5V (4) / approx. 300 hours of continuous use; auto-off after 8 minutes of non-useElectrode/ProbeHI73120 replaceable ORP electrode (included)Environment-5 to 50°C (23 to 122°F); RH max 100%Dimensions163 x 40 x 26 mm (6.4 x 1.6 x 1.0’’)Weight100 g (3.5 oz.)Ordering InformationHI98120 (ORP) is supplied with HI73120 ORP electrode, HI73128 electrode removal tool, batteries and instructions.Warranty1 year (probe 6 months)

ORP MeterJual HI 98160 Range pH -4.0 to 20.0 pH; -4.00 to 20.00 pH ORP ± 699.9; ± 2000 mV Temperature -20.0 to 120.0° C ( -4.0 to 248.0° F) Resolution pH 0.1 pH; 0.01 pH ORP 0.1 mV ( ± 699.9 mV) ; 1 mV ( ± 2000) Temperature 0.1° C ( 0.1° F) Accuracy @ 20° C pH ± 0.1 pH; ± 0.01 pH ORP ± 0.2 mV ( ± 699.9 mV) ; ± 1 mV ( ± 2000 mV) Temperature ± 0.2° C ( ± 0.4° F) excluding probe error Calibration pH up to five point calibration with eight standard buffers available ( 1.68, 3.00, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) , and two custom buffers ORP automatic, two point at 0, 350 mV or three point at 0, 350, 1900 mV Offset ± 1 pH Slope from 80 to 110% pH Electrode HI 1230B PEI body pH electrode with BNC connector and 1 m ( 3.3’ ) cable ( included) Temperature Probe HI 7662 stainless steel temperature probe with 1 m ( 3.3’ ) cable ( included) Log On Demand 500 samples PC Connectivity opto-isolated USB with optional HI 92000 software Input Impedance 1012 Ohms Power Supply 1.5V AAA ( 3) / approximately 200 hours of continuous use without backlight ( 50 hours with backlight) . User selectable auto-off ( 5, 10, 20, 60 minutes or can be disabled) Environment 0 to 50° C ( 32 to 122° F) ; RH max 100% Dimensions 185 x 72 x 36 mm ( 7.3 x 2.8 x 1.4” ) Weight 300 g ( 10.6 oz.) Order Information: HI 98160 is supplied with HI 1230B pH electrode, HI 7662 temperature probe, HI 70004 pH 4.01 buffer solution sachet, HI 70007 pH 7.01 buffer solution sachet, batteries, instructions and rugged carrying case.