MUFFLE FURNACE

Furnace Heating ElementDescriptionVulcan® D-SERIESBenchtop Furnaces Features:- Single Set Point Digital control- Easy to read, accurate digital display- Operator controls the rate of temperature climb- Available in three sizes : 130, 550, or 1750 cubic inches- Available in three sizes : 130, 550, or 1750 cubic inches- Programmable Temperature, Rate, Hold Time, Audio Alarm, °C/°F- Durable Hybrid Muffle for fast heating and cooling- Corrosion resistant Stainless Steel front panel- Integral door safety switch Technical Information : ModelD-130D-550D-1750Part Number949512094951219495130949513194951409495141 (Euro)Voltage120V - 50/60Hz200-240V - 50/60Hz120V - 50/60Hz200-240V - 50/60Hz200-240V - 50/60Hz230V - 50/60HzWatts72010601440240048004370Control TypeSingleSetpoint DigitalSingleSetpoint DigitalSingleSetpoint DigitalMaximum Operating Temp1100°C2012°F1100°C2012°F1100°C2012°FMaximum Ramp Rate40°C/min72°F/min40°C/min72°F/min40°C/min72°F/minWatts to Maintain 1000°C52510502200 

Furnace Heating ElementDescriptionJFF 2000Furnaces Ideal for wax burnout, enameling and heat treating. Features:• Lightweight, one-piece molded heating chamber• Heats to 1000°F (538°C) in 15 minutes; Max. operating temp. 2012°F (1100°C)• Large chamber, 9”W x 6.5”H x 9”D• Simple dial power control Technical Information :SPECIFICATIONControl TypePower analogChamber Dimensions :widthdepthheight 230mm (9”)230mm (9”)170mm (6.5”)Chamber Size526 cu.in.Cabinet Dimensions :widthdepthheight (door open)height (closed open) 390mm (15.5”)390mm (15.5”)420mm (16.5”)420mm (16.5”)Maximum OperatingTemperature1100°C (2012°F)Power Consumption Watts1500wWatts to Maintain 1000C1050Net Weight13 kg (29 lbs) 

Furnace Heating ElementDescriptionFurnacesMuffle Furnaces with Brick Insulation and Flap Door or Lift Door Heating elements on support tubes radiating freely into the furnace chamber provide for particularly short heating times for these muffle furnaces. Thanks to their robust lightweight refractory brick insulation, they can reach a maximum working temperature of 1300 °C. These muffle furnaces thus represent an interesting alternative to the familiar L(T) 3/11 models, when you need particularly short heating times or a higher application temperature. - Tmax 1300 °C- Heating from two sides- Heating elements on support tubes ensure free heat radiation and a long service life- Multi-layer insulation with robust lightweight refractory bricks in the furnace chamber- Housing made of sheets of textured stainless steel- Dual shell housing for low external temperatures and stability- Optional flap door (L) which can be used as work platform or lift door (LT) with hot surface facing away from the operator- Adjustable air inlet in the furnace door- Exhaust air outlet in rear wall of furnace- Solid state relays provide for low-noise operation- Defined application within the constraints of the operating instructions- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive Additional equipment : - Chimney, chimney with fan or catalytic converter- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load- Protective gas connection to purge with non-flammable protective or reaction gases- Manual or automatic gas supply system- Process control and documentation via VCD software package for monitoring, documentation and control ModelTmaxInner dimensions in mmVolumeOuter dimensions in mmConnectedElectricalWeightMinutes °Cwdhin lWDHload kWconnection*in kgto Tmax2L, LT 5/1313002001701305490450580+32012.41-phase4245L, LT 9/1313002302401709530525630+35013.01-phase6050L, LT 15/13130026034017015530625630+35013.51-phase70601Including opened lift door (LT models) *Please see page 60 for more information about supply voltage2If connected at 230 V 1/N/PE rsp. 400 V 3/N/PE 

Furnace Heating ElementDescriptionFurnacesAshing Furnaces with Flap Door or Lift Door The ashing furnaces LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity. - Tmax 1100 °C- Heating from two sides- Ceramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replace- Air exchange of more than 6 times per minute- Good temperature uniformity due to preheating of incoming air- Insulation made of non-classified fiber material- Housing made of sheets of textured stainless steel- Dual shell housing for low external temperatures and stability-Optional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operator- Solid state relays provide for lownoise operation- Defined application within the constraints of the operating instructions- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive Additional equipment :- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load- Process control and documentation via VCD software package for monitoring, documentation and control ModelTmaxInner dimensions in mmVolumeOuter dimensions in mmConnectedElectricalWeightMinutesFlap door°Cwdhin lWDH1load kWconnection*in kgto Tmax2LV 3/11110016014010033853607351.21-phase20120LV 5/11110020017013053854207902.41-phase35120LV 9/11110023024017094154858453.01-phase45120LV 15/111100230340170154155858453.51-phase55120             ModelTmaxInner dimensions in mmVolumeOuter dimensions in mmConnectedElectricalWeightMinutesLift door°Cwdhin lWDH1load kWconnection*in kgto Tmax2LVT 3/11110016014010033853607351.21-phase20120LVT 5/11110020017013053854207902.41-phase35120LVT 9/11110023024017094154858453.01-phase45120LVT15/111100230340170154155858453.51-phase551201Including exhaust tube (Ø 80 mm) *Please see page 60 for more information about supply voltage2If connected at 230 V 1/N/PE rsp. 400 V 3/N/PE 

Furnace Heating ElementDescriptionFurnacesMuffle Furnaces Basic Models With their unbeatable price/performance ratio, these compact muffle furnaces are perfect for many applications in the laboratory. Quality features like the dual shell furnace housing of rust-free stainless steel, their compact, lightweight constructions, or the heating elements encased in quartz glass tubes make these models reliable partners for your application. - Tmax 1100 °C, working temperature 1050 °C- Heating from two sides from heating elements in quartz glass tubes- Maintenance-friendly replacement of heating elements and insulation- Insulation made of non-classified fiber material- Housing made of sheets of textured stainless steel- Dual shell housing for low external temperatures and high stability- Flap door which can also be used as a work platform- Exhaust air outlet in rear wall- Solid state relays provide for low-noise operation- Compact dimensions and light weight- Controller mounted under the door to save space- Defined application within the constraints of the operating instructions Additional equipment :- Chimney, chimney with fan or catalytic converter (not for L 1)- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load- Protective gas connection to purge with non-flammable protective or reaction gases- Manual gas supply system ModelTmaxInner dimensions in mmVolumeOuter dimensions in mmConnectedElectricalWeightMinutes °Cwdhin lWDHload kWconnection*in kgto Tmax1LE 1/1111009011511012902804301.51-phase1010LE 2/11110011018011023303854301.81-phase1025LE 6/11110017020017063904354901.81-phase1835LE 14/111100220300220144405355402.91-phase25401If connected at 230 V 1/N/PE rsp. 400 V 3/N/PE *Please see page 60 for more information about supply voltage 

Furnace Heating ElementDescriptionFurnacesMuffle Furnaces with Flap Door or Lift Door The muffle furnaces L 1/12 - LT 40/12 are the right choice for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. The muffle furnaces come equipped with either a flap door or lift door at no extra charge. - Tmax 1100 °C or 1200 °C- Heating from two sides by ceramic heating plates (heating from three sides for muffle furnaces L 24/11 – LT 40/12)- Ceramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replace- Insulation made of non-classified fiber material- Housing made of sheets of textured stainless steel- Dual shell housing for low external temperatures and high stability- Optional flap door (L) which can be used as work platform or lift door (LT) with hot surface facing away from the operator- Adjustable air inlet integrated in door (see illustration)- Exhaust air outlet in rear wall of furnace- Solid state relays provide for low-noise operation- Defined application within the constraints of the operating instructions- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive Additional equipment :- Chimney, chimney with fan or catalytic converter (not for L 1)- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load- Protective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter)- Manual or automatic gas supply system- Process control and documentation via VCD software package for monitoring, documentation and control  

 MUFFLE FURNACE FB 1410-M33 TANURAlat Laboratorium UmumCAP. 2 LITER Thermo Scientific Benchtop Kecil Muffle Furnace sangat ideal untuk pengabuan sebagian besar jenis sampel organik dan anorganik, panas mengobati bagian baja kecil, melakukan tes pengapian, melakukan analisis gravimetri dan untuk penentuan padatan volatil dan ditangguhkan.tungku ini memiliki A1 single digital set point control. Sebuah layar tunggal menunjukkan suhu yang sebenarnya atau set point.isolasi serat keramik memungkinkan lebih cepat panas-up, mengurangi konsumsi energi.elemen pemanas tertanam di atas dan kedua belah pihak meningkatkan keseragaman suhu.Drop-down ganda pintu sebagai rak untuk bongkar muat.kabel listrik dikirimkan dengan semua model.KeamananUntuk perlindungan tambahan, switch pengaman pintu berhenti daya ke elemen pemanas ketika Anda membuka pintu.Termokopel perlindungan istirahat memotong daya ke elemen pemanas, mencegah kegagalan kondisi pelarian thermocouple.Belakang ruangan menggabungkan port 0,38 "(0,95 cm) diameter untuk memantau suhu ruang dengan perangkat pengukur independen- See more at: http://www.depolab-indonesia.com/product/dosimeter-pocket-pdm-p275923.aspx#sthash.mD5DRDXr.dpuf