Accuracy:± 5 % or 0.01 ppm (as N) for sample temperature 5 - 40 °C (41 - 104 °F); ±10% or 0.02 ppm for sample temperature 40 - 50 °C (104 - 122 °F), whichever is greater
Alarm:Four; not powered SPDT relays, each rated at 5A resistive, 240 VAC maximum
Certifications:CE (EN 61326-1: 2006; EN 61010-1: 2010; EN 60529: 1991, +A1:2000
cETLus (UL 61010-1:2012; NEMA 250:2003; CSA C22.2 No 61010-1:2012)
Australian RCM Marking
Communication:Modbus RS485, Profibus DP (available with external controller), 4-20mA Output
Cycle Time:4.5 min minutes
Enclosure Rating:IP56 / NEMA 4X
External Filter:No
Grab Sample:Grab Sample In and Grab Sample Out capability
Inlet:6mm OD push-to-connect fitting for plastic tubing
Light Source:Class 1M LED (light emitting diode) with a peak wavelength of 650 nm
Lower Limit of Detection (LOD):0.01 ppm (as N)
Material:Polycarbonate (PC)/ABS case, PC Door, PC hinges and latches, 316 Stainless Steel hardware
Measuring Interval:4.5 minutes (Interval selectable from 4.5 to 240 minutes)
Mounting:Wall, panel, or table
Number of Channels:1
Number of sample streams:1 or 2 in programmable sequence
Operating Humidity:5 - 95 % non-condensing
Operating Temperature Range:5 - 45 °C (41 - 113 °F)
Options:Standard
Outlet:11mm (7/16 in.) ID slip-on fitting
Output:Four 0/4-20 mA Outputs, load impedance 600 ohm maximum
Parameter:Total Ammonia, Monochloramine, and Free Ammonia
Pollution Degree:2/II
Power Requirements (Hz):50 - 60 Hz
Power Requirements (Voltage):100 - 240 VAC
Range:0.01 - 2 ppm (as N), 0.1 - 10.0 mg/L (as Cl₂)
Reagent Consumption:1L of reagents every month with 5 minute cycle time
Repeatability:3 % or 0.01 ppm (as N), whichever is greater
Response Time:Within 5 minutes
Sample Flow Rate:100 - 1000 mL/min
Sample Pressure:2.5 - 87 psi (0.17 - 6.8 bar)
Sample Temperature:5 - 50 °C (41 - 122 °F)
Storage Conditions:-20 - 60 °C (-4 - 140 °F)
Warranty:1 year
Weight:20.5 kg (45.19 lb) without reagents and standards, 30 kg (66.14 lb) with reagents, standards and cleaning solution