phone Phone
+6285210207070
close
menu

PT ANDALAN BANGUN SEJAHTERA

sql
Steriliser SN30 Memmert
Hover to Zoom

Jual Steriliser SN30 Memmert



Spesifikasi Steriliser SN30 Memmert

Steriliser SN30

Alat Laboratorium Umum

Standard delivery Steriliser

The indispensable safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times.

On this page, you can find all the essential technical data on the Memmert hot air steriliser. Our customer relations team will be pleased to help if you want further information. If you should require a customised special solution, please contact our technical specialists at myAtmoSAFE@memmert.com.


Temperature

Setting temperature range+20 to +250 °CWorking temperature rangeat least 5 above ambient temperature to +250 °CTemperature sensor1 Pt100 sensor DIN class A in 4-wire-circuit

Control technology

Language settingGerman, English, Spanish, French, Polish, Czech, HungarianControlCOCKPITSingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour displayTimerDigital backwards counter with target time setting, adjustable from 1 minute to 99 daysFunction SetpointWAITthe process time does not start until the set temperature is reachedCalibrationthree freely selectable temperature valuesadjustable parameterstemperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime

Ventilation

Convectionnatural convectionFresh airAdmixture of pre-heated fresh air by electronically adjustable air flapVentvent connection with restrictor flap

Communication

Documentationprogramme stored in case of power failureProgrammingAtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

Safety

Temperature controladjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperatureAutodiagnostic systemfor fault analysis

Standard equipment

Doorfully insulated stainless steel door with 2-point locking (compression door lock)Internals1 stainless steel grid(s), electropolishedWorks calibration certificateCalibration at +160°C


Temperature

Setting temperature range+20 to +250 °CWorking temperature rangeat least 5 above ambient temperature to +250 °CTemperature sensor1 Pt100 sensor DIN class A in 4-wire-circuit

Control technology

Language settingGerman, English, Spanish, French, Polish, Czech, HungarianControlCOCKPITSingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour displayTimerDigital backwards counter with target time setting, adjustable from 1 minute to 99 daysFunction SetpointWAITthe process time does not start until the set temperature is reachedCalibrationthree freely selectable temperature valuesadjustable parameterstemperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime

Ventilation

Convectionnatural convectionFresh airAdmixture of pre-heated fresh air by electronically adjustable air flapVentvent connection with restrictor flap

Communication

Documentationprogramme stored in case of power failureProgrammingAtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

Safety

Temperature controladjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperatureAutodiagnostic systemfor fault analysis

Standard equipment

Doorfully insulated stainless steel door with 2-point locking (compression door lock)Internals1 stainless steel grid(s), electropolishedWorks calibration certificateCalibration at +160°C

Untuk keterangan lebih lanjut, silahkan download PDF ini :