AC Current Probe Model MN02
Small and compact, the AC Current Probe Model MN02 is the ideal complement for any multimeter to measure AC currents in low-power secondary or industrial applications. When used with an AC Ammeter, it allows you to directly read the current measured when the probe is clamped around one of the carrying conductors.
Specifications:
Maximum Conductor Size | 0.39" (10mm) |
Current Range | 100Arms AC |
Measurement Range | 50mA to 100A |
Output | 5ft (1.5m) lead with 4mm safety banana plug |
Transformation Ratio | 1000/1 |
Output Signal | 1mA/A AC (100mA @ 100A) |
Accuracy 50/60Hz | 1% R ± 0.02A with 1Ω load |
Frequency Range | 48 to 10kHz |
Phase Shift At 50Hz | 3° with 1Ω load |
Open Secondary Voltage | ≤30V |
Load Impedance | 10Ω max |
Overload | 170A for 10 min ON, 30 min OFF |
Dimensions (H x W x D) | 4.43 x 1.48 x 1.02” (112.5 x 37.5 x 26mm) |
Weight With 24” (610mm) Sensor | 6.5 oz (180g) |
Operating Temperature | 14° to +122°F (-10° to +50°C) |
Storage Temperature | -40° to +176°F ( -40° to +80°C) |
Operating Humidity | 90% RH |
Pollution Degree | 2 |
Ingress Protection (Ip) | IP40 |
EMC | EN 61326-1 |
Safety Compliance | EN/IEC 61010-1 600V CAT III,EN/IEC 61010-032 |
Hubungi : Juni Tarigan (Mr.) 0811 198 0702
Pera (Ms.) 0811 3801 0819
Admin 0813-2310-201PT. ANDALAN BANGUN SEJAHTERA Jl. Sumur Batu No. 1, Kemayoran Jakarta Pusat - Indonesia 10640 Telp : +6221-42803207, 4227517Fax : +6221-42803208